Altavoces de suelo 91db, 4 Ohmios, 32-30000 Hz/+- 3dB
- Cherry High Gloss
- Black/ White "cream" High Gloss
- Rosewood High Gloss
- Figured Maple High Gloss
Advertencia: ¡Últimos artículos en inventario!
For Adamante the challenge was to obtain in the most reduced form factor, performances closest to Enigma ones. We think we have succeeded.
Even if volumes are very closed, Adamante is slightly smaller than Onira and should make integration in most modern rooms easier. Obviously, this new model us the same special cabinet shape as our other models: two curved sides of different length and no symmetrical faces. This choice is dictated by cosmetic and technical issues: The heterogeneous nature of the different panels (size, radius, angle, length), imply a non –uniform resonance distribution and a reduced sound radiation for the most excited ones.
Enclosure panels consist of multiple thin layers of high density MDF, glued together, and pressure molded to reach final thickness of 28 to 44mm. This sandwich structure allows to break and attenuate vibration waves inside the material. The aim is to drastically improve cabinet damping. The laminar structure is formed around a complex framework of eight heavy bracing panels.
To optimize the dispersal of structure-borne noise, the Adamante enclosure stands on its central cone positioned on the axis of the center of gravity. The same device is used on all our models starting with the Armonia. The four other spikes are for stability only.
Mechanical inertia is mandatory for every high end speakers. For this purpose we use a steel coupling plate of 10mm to fasten front and back metal stands.
Adamante acoustic load principle is similar as the one used on Onira and Enigma. It’s an hybrid load, mixing an acoustic line and a bass-reflex. Thanks to its wide diameter, the port tube placed beneath the loudspeaker, reduces air flow noise, improves room interaction and lowers non-linearity.
Internal damping combines original solutions and a mixture of four different materials to cancel any standing waves.
The Adamante uses two 18 cm (6.5’’) bass/mid range drivers. These two drivers are similar to those used on Onira, but with deep modifications. Improvement on the magnet assembly with reduced distortions. Improvement in mechanical damping, and electro-magnetic field interferences. The cone material is still “Isotactic Matrix”. A new type of composite material based on woven polypropylene. This cone material exhibits stiffness, lightness and good damping properties.
The implementation of an original loading architecture brings the benefit of a real synchronized operation of the two mid-woofers. This is mostly not the case with common design using similar drivers in a single load.
The high frequency drive unit is a professional ribbon tweeter. It uses an aluminum/ polymer sandwich diaphragm for improved linearity. The ribbon is mechanically held tight on both sides to avoid oscillations on some specific signals. The drive unit effective piston area is twice as the Onira one’s, and four times the area of ordinary dome tweeters, for a moving mass of only 88mg.
This wide emissive surface combined with Christian Yvon crossover technology, allow an unusual low cutting frequency. This way we can spread the well-known sound qualities of ribbon tweeter over a wider frequency range.
The “DRIM” crossover technology used in Apertura products allows a minimum intermodulation and respect of time alignment. This filter technology has an ellipse on one of its branches, with three different slopes: 6dB, 12dB and 24dB per octave. Low-pass and High-pass circuits are independent. Hand wiring on high power Pcb (210µm copper thickness), with no less than thirty seven high end components per speaker.
Musically speaking, we recognize Onira qualities with significant improvements. Heavier foundation, more precision and refinement. Combined with the most musical electronics, Adamante will offer a new listening delight experience to music lovers.
|Adamante takes up the tweeter used for the very first time on the Enigma.|
A ribbon tweeter of professional grade with a very high sensitivity.
22cm² sandwich diaphragm and only 88mg.
Powerful Neodym magnet.
Wide bandwith, very fast transition.
The customized aluminum front panel is CNC machined.
|For bass-mid frequencies we are using two of our 6.5’’ isotactic-Matrix cone driver, but with major improvements on the magnet circuit, electromagnetic treatment and mechanical damping.|
In order to reduce distortions, we are using a heavy copper ring on the pole piece and now, a solid copper phase plug.
|28 to 44mm multilayers, high density MDF structure.|
Panels pressure molded, on a highly complex eight bracing panels skeleton.
Laminar structure for coloration free enclosure.
|Proprietary « DRIM » structure.|
Two separate boards for low and high frequencies.
Only high end components: Jantzen coils with 1.4mm² baked wires, high grade polypropylene capacitors. No less than 37 components are used for a single Adamante.
Crossover hand wired on FR4 epoxy Pcb with copper thickness of 210µm. Internal wiring: Copper silver platted wire – PTFE isolation.
Solid copper/ silver plated binding post.
|The cone, the front and back metal stands are fastened to a 10mm steel coupling plate.|
Thanks to its wide section, the port tube placed beneath the loudspeaker, reduces the air flow noise and improve room interaction.
Like all other Apertura speakers, Adamante stands on a central cone, positioned on the axis of the center of gravity.
Frequency range : 32-30 000Hz/ +-3dB
Sensitivity : 91dB/1w/1m
Impedance : 4Ω
Load : Vented box
Drive-units : 2x 7" Isotactic Matrix cone Bass/ Mid range unit 5" ribbon tweeter
Crossover frequency : 1,8kHz
Terminals : Single wire binding posts (bananas or spades)
Dimensions : 220x353x1150mm (WxDxH), with stands 358x390x1213mm
Weight : 52kg net - 61kg (shipping weight)
No hay reseñas de clientes en este momento.