ATC SCM 50 SL
Advertencia: ¡Últimos artículos en inventario!
Existing libraries of recorded music, the commitment of recording companies to stereo in its current form and the new high resolution digital two-channel formats indicate that stereo will continue to be the main source of recorded music for the foreseeable future.
For these reasons ATC still regards the main stereo speaker pair as the foundation on which a high performance multi-channel system can be built. What better way to establish that foundation than by choosing the world-renowned and hugely capable SCM50 ASL three-way active monitor .
The SCM50 ASL (active) and SCM50 SL (passive) are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment.
The monitors' ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include an upgraded tweeter and enhanced port profile have brought about further improvements in all performance parameters.
Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 9" bass driver incorporates ATC's unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion.
Like the mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range.
|SCM50 ASL (Active)||SCM50 SL (Passive)|
|Amplitude Linearity ±2dB||80Hz - 17kHz||80Hz - 17kHz|
|Frequency Response (-6dB free standing)||40Hz & 22kHz||40Hz & 22kHz|
|Matched Response||+/- 0.5dB||+/- 0.5dB|
|Sensitivity (sine wave)||Not applicable||85dB @ 1W @ 1metre|
|Max continuous SPL @ 1 metre||112dB SPL||112dB SPL|
|Crossover Frequencies||380Hz and 3.5kHz||380Hz and 3.5kHz|
|Input Connections||XLR||Binding posts/4mm banana plugs|
|Input Sensitivity||IV||Not applicable|
|Input Impedance||>10k ohms balanced XLR||Not applicable|
|Amplifier Output:||Not applicable|
|HF||50 Watts RMS|
|Mid||100 Watts RMS|
|Bass||200 Watts RMS|
|Recommended Power Amplifier||Not applicable||100 to 1500 Watts|
|Nominal Impedance||Not applicable||8 Ohms|
|Overload Protection||LDR tweeter protection, plus active FET MGR (amplifiers)||Not applicable|
|Power Requirements:||Not applicable|
|Voltage||100, 115, 230 (factory set)|
|Power||Nominal 90 Watts|
Driven 350 Watts
|Cabinet Dimensions (HxWxD)||717 x 304 x 480mm (inc amps)||717 x 304 x 425mm|
|Overall Weight||48.9kg (107.5lb)||41.1kg (90.5lb)|
|Cabinet Finishes||Standard real wood veneers are available in Black Ash, Walnut, Cherry, Rosewood and Yew. Other veneers and finishes can also be supplied to special order|
ATC reserves the right to vary products and specifications without prior notice.
Acoustic Transducer Co. is a trading name and ATC is the registered trade mark of Loudspeaker Technology Ltd.
No hay reseñas de clientes en este momento.