Skip to content

Sound Sevilla Import
E-mail

ALLNIC T-1500 300B SINGLE ENDED

Amplificador integrado a válvulas 300B 12w por canal, single ended. IVA NO INCLUIDO.

( ALLNIC )
€5.350,00

Realizar una consulta sobre este producto

T-1500 The T-1500 stereo amplifier is Allnic Audio??s top of the line 300B SET stereo integrated amplifier model. Like all Allnic Audio products, the T-1500 has permalloy (iron and nickel alloy) for its transformer cores. Allnic is grateful to Mr. G.W. Elmen of Western Electric for inventing permalloy for transformer core use, and in so doing, providing an enormous service to recorded music listeners everywhere. The T-1500 has the following features: ? 12.5 watts per channel of pure class A high power output. The T-1500 is a single ended power amplifier. Almost all other 300B amplifiers are under, and distortion, driven. This is a result of the use of conventional ??Resister-Capacitor? circuits, which give only up to around a 70V swing voltage, with high distortion. This means that an already distorted signal of a lower than optimum swing voltage is directed to the deep biased 300B grid. Allnic??s powerful ??Inductor Drive? circuit gives up to a 150V swing voltage, with very low distortion (about 0.3%). It is this drive delivered to the T-1500 that allows for a higher output (12.5w) than the approximately 8 ?? 10w output that could be expected from standard 300B circuits. ? Remote controlled 41-step silver contact attenuator. The T-1500 employs this house made quality attenuator instead of standard, outsourced carbon film potentiometers. The Allnic attenuator provides complete channel balance and less distortion. ? Real power drive. The driver tube, a PCL86, is a very strong power pentode/triode. We use this power pentode to drive the 300B??s via a choke plate inductor. Our choke inductor (100% nickel permalloy PC core) has very low power loss and infinitely high load impedance. This configuration is an ideal drive stage for 300B SET. ? No separate pre-amplifier section. The T-1500 has only two gain stages, with a total gain of +37 dB. The PCL86 driver tube gain stage receives the signal directly from the line inputs. The reduced number of gain stages means less distortion. ? Nickel alloy output transformer. Allnic uses sophisticated ratio mixed nickel permalloy PB cored output transformers. Because of their extremely high initial permeability, it is possible to use lower turns on the primary winding while retaining very high ??open circuit inductance??. That means a resulting very wide frequency range and low distortion bass response. This is another reason why the T-1500 excels over other 300B integrated amplifiers. Allnic also uses a very big nickel core, so as not to be magnetically saturated at a high current of level of 100mA. ? Long life and trouble-free operation. Allnic employs a ??soft start circuit? to protect the tubes and other parts. It applies the high B+ voltage only after tubes are fully warmed-up. ? Fixed bias control grid. Allnic prefers to use low distortion and high output ??fixed bias? rather than the relatively higher distortion and lower output ??self-bias? method. That way, it is possible to eliminate the use of cathode resisters and their associated heat production. ? Natural negative feedback. The T-1500 applies about -6dB of negative feedback. This is a very complimentary amount of negative feedback that differentiates the Allnic 300B single ended amplifier from the standard, which has a very coloured and weak speaker driving force. With this natural feedback, the T-1500 has a relatively high ??damping factor??, very low distortion, and a higher S/N ratio, without losing the signature single ended natural sound quality. Key features of the Allnic Audio T1500 stereo integrated amplifier ? Single tube gain stage ? Transformer coupled ? Optimized for standard 300B (12.5 watts/channel) and 300B-XLS (15 watts/channel) tubes ? Easy bias ? Analog power tube meters ? ?soft start? circuitry ? A unique approach to output tube drive: more available power without overdriving tubes or reducing tube life ? Pure class A operation ? Absorb gel tube dampers ? Natural level of negative feedback (-6db) for reduced distortion, improved clarity and class-leading bass ?? withstandard setting, ergonomic build quality ? The Allnic T-1500 has it all: resolution, soundstage, palpability, drive ?? pure 300B vacuum tube magic in a single, stunningly beautiful package. Specifications ? Output Power : 12.5w + 12.5w (4, 8 or 16Ω load, at 1KHz) ? Distortion : 0.3% at 1KHz, 2.83V ? Frequency Response : 20Hz ?? 20KHz Flat ? S/N Ratio : -80dB (CCIR, 1KHz) ? Damping Factor : 10 at 8Ω load at 1KHz ? Voltage gain : +35dB ? Input Impedance : 10KΩ (single-ended, unbalanced) ? Input Sensitivity : 230mV for rated power ? Tubes : 300B X 2 (power triode), PCL86 X 2 (driver tube ?? equivalent to 14GW8) ? Fuses : AC Mains ?? 3A / 250V (110W) (two supplied ?? one is a spare). Tubes ?? 0.5A, 250V, 20mm glass type ? Dimensions : (W x D x H) 430mm x 330mm X 240mm ? Weight : 20Kg (44 lbs) net ; 21.8 Kg (48 lbs) shipping weight T-1500 Stereophile Review T-1500 Dagogo review T-1500 Audio(S.Korea??s magazine) review