HRT iSTREAMER 230V
DAC de alto rendimiento HRT iStreamer para iPad, iPod e iPhone. VERSIÓN 12V
Advertencia: ¡Últimos artículos en inventario!
HRT Music iStreamer para iPad, iPod e iPhone.
El iStreamer es un interfaz de alto rendimiento de audio que permite a un iPad, iPhone o iPod y un equipo de sonido HI-FI convertirse en socios perfectos. Con el iStreamer conectado, puede disfrutar de un sonido real con calidad de CD con la comodidad de tener toda tu música en un solo dispositivo.
¿Como funciona HRT ?
Sólo tiene que conectar su iPad, iPhone o iPod al iStreamer, enchufe el iStreamer a su fuente de alimentación incluida y a su un equipo de sonido HI-FI.
Desde la aplicación para iPod, iPad e iPhone o directamente en el iPod, simplemente pulse PLAY y disfrutar de una calidad inigualable de sonido.
Con su sistema de circuitos de alto rendimiento y modo de eliminación de jitter, el iStreamer dejan el reproductor de CD y la colección de CD obsoletos.
Por primera vez, se puede disfrutar de un nivel de calidad de sonido nunca antes posible a partir de un dispositivo de audio portátil.
El iStreamer es totalmente compatible con aplicaciones diseñadas para ejecutarse en un iPad, iPhone o iPod.
El iStreamer le permite conectarse al equipo HI-FI de su casa, la televisión o sistema estéreo para escuchar en alta calidad radio por Internet, streaming de música y películas de proveedores como Rhapsody ™, Napster, Pandora ™, ™ Netflix y otros servicios en línea.
Full Scale output 2.25 Volts RMS
Frequency Response (20 Hz/20 kHz) 0 dB/ - .4 dB
Noise Floor (DC to 30 kHz) 28 uV RMS
S/N Ratio (DC to 30 kHz) 98 dB
THD+N (1 kHz FS 44.1 kS/s) 0.02%
Data Rate 32K, 44K1 o 48K
Sample Depth 16 bit
Transfer Protocol Host Mode (master)
Charge output up 2.1 A
Dimensions (L x W x H) 4.6” x 2.3” x .875”
iPod classic, iPod touch (1st , 2nd , 3rd and 4th gen.), iPod nano (1st , 2nd , 3rd ,4th , 5th and 6th gen.) and iPod gen. 6, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, and iPad.
Descarga las especificaciones
The HRT iStreamer-Alternating Current (AC) is a product that makes the music coming out of your iPad, iPhone, or iPod sound dramatically better when connected to a music entertainment system in either a home/office setting or in a vehicle. The iStreamer AC is not designed to be used with PC or Mac computers like the other HRT Music Streamers. Rather, it is a high performance external sound card/audio interface that has been specifically designed to exclusively interface with modern iDevices such as the iPod Touch® (1st, 2nd, 3rd, 4th, and 5th gen), iPod Classic®, iPod Nano® (2nd, 3rd, 4th, 5th, and 6th gen), iPhone 4®, iPhone 3GS®, iPhone 3G®, iPhone®, iPhone5®, iPhone5S®, iPhone5C®, iPad®, iPad (3G)®, iPad 2®, the New (2012) iPad®, and the iPad Mini®. The iStreamer AC redirects the digital music stream from the iDevice to itself, bypassing the iDevice’s own internal Digital-to-Analog converter (DAC) and uses its own DAC instead, taking over the job of decoding the digital bits into analog music, allowing a far higher level of sonic performance than if listening directly from an iDevice.
The iStreamer AC uses a (provided) 5VDC power supply to connect to an AC outlet in your home or office**, and is very easy to operate. Simply connect one end of the supplied RCA cables (or any set that you prefer to use) to the two RCA jacks on the iStreamer AC, then connect the other end of the RCA cables to any available analog input (except a PHONO input, which is for analog turntables only) on your integrated amplifier, preamp, receiver, power amplifier with attenuators, or powered speakers. Next, make sure that your iDevice is in “standby” mode (where the device is powered on, but has the black screen showing), and connect the included/proprietary (you must use the HRT-supplied cable, as the Apple stock synch cable has a different pin configuration and will not function correctly) synch cable from the iStreamer AC to your iDevice. Then, attach the cable from the (plugged-into-the-wall) power supply, and look for a brief flash of the amber lights on the iStreamer AC that indicates that it has successfully powered on, and finally, watch for the single blinking amber light that indicates that the iStreamer AC has successfully "paired" with your iDevice. Once you see this light blinking, you can go directly to iTunes and start playing music with up to CD-quality sound, depending on the quality and resolution of the song file being played*. Even the lowliest MP3 file sounds richer, bolder, and more dynamic compared to playing the same song directly from the iDevice, but CDs ripped at full 16/44.1k resolution sound fantastic.
The iStreamer AC provides full support for applications designed to run on an iPad®, iPhone®, or iPod®, as well as allowing you to listen to internet radio stations and streaming music services, as well as the audio content of on-line movie services such as Netflix and the like.
With its Apple-approved, ultra high performance circuitry, and "host mode" of operation that eliminates jitter in the digital interface, the iStreamer AC, combined with your iDevice, renders a CD player and a library of physical discs effectively obsolete. For the first time, without having to tether your iDevice to a "middleman"-style docking unit and separate Digital-to-Analog Converter (DAC), you can enjoy a level of sound quality in your home entertainment system or vehicle never before possible from a portable audio device. A great side benefit of using the iStreamer AC is that it actually charges your iDevice as it plays music, extending its playtime.
*iDevices are limited by Apple to play music files with a maximum resolution of 16bit/48k, so one cannot play any “Hi-Res” files (24bit/96k, etc.). Basically, if you can load it onto or play through your iDevice, the iStreamer AC will play any given stored or streaming file at its full native resolution up to a max of 16bit/48k.
** HRT makes two versions of the iStreamer: a “standard” AC version iStreamer AC that is equipped with a separate power supply appropriate to its area of distribution that is designed to draw power from the local AC mains; and the iStreamer 12V/Mobile which comes with a compact 12VDC-to-5VDC power supply that simply fits into your vehicle's or boat's cigarette lighter or spare 12VDC auxiliary outlet.
***It must be noted that the two versions of the HRT iStreamer are not identical, in that the iStreamer 12V comes with a shorter power cord and has different firmware than the AC models that allows for optimum charging of iDevices in a mobile environment. One can use an iStreamer 12V in a home/office environment with the purchase of an area-appropriate power supply, but the iStreamer-AC units will not function correctly in a 12V environment.
No hay reseñas de clientes en este momento.