NAGRA BPS Ver más grande



Nuevo producto


Más detalles

2 200,00 € impuestos inc.





In his excellent biography of the Swiss-born sculptor and painter Alberto Giacometti, James Lord relates a charming story from a difficult time. It was 1939, the Germans had just invaded Czechoslovakia, and the Swiss government decided to hold a National Exhibition to reaffirm “traditional values” (whatever those were). Giacometti, whose slender figurines were at the time becoming increasingly miniaturized, was invited to exhibit a major sculpture in the central ourtyard of the textile pavilion. When greeted by the guy in charge of installing the artwork, who had a truck ready to haul it from the train station, Giacometti reportedly replied, “There’s no need for the truck. I have the statue with me.” At which point he pulled a large matchbox from his coat pocket and produced a tiny plaster statuette no more than two inches high. To say that those in charge of this patriotic event were not amused would be putting it mildly.

I had a similar—though not unpleasant—surprise recently, when my UPS driver delivered a somewhat different Swiss-made object to my doorstep. The carton I signed for was small and lightweight, and I assumed it contained a book I’d ordered on-line. Without even looking at the shipping label I grabbed a utility knife and sliced through the packing tape. Of course, I’ve already spoiled the punch line, because what I found inside was no book but Nagra’s latest phonostage, the battery-powered BPS.

While Nagra’s gear is typically modestly sized, at a miniscule 4.25" x 1" x 6.25", and a featherweight 16.9 ounces, the BPS takes modest size to a Giacometti-esque level. Moreover, the company’s superbly engineered and built products usually command very high prices. So it’s refreshing to report that the BPS is priced at a relatively affordable $2399.

BPS Phonostage, interior

Interestingly, the BPS (which stands for Bipolar Phono Stage) is only the second standalone phono preamp from Nagra. It comes on the heels of the VPS (Valve Phono Stage, $5995), which was released in 2008. Indeed, Nagra’s development report for the BPS says it was based on the circuit of the VPS—itself derived from the firm’s $12,795 PL-P preamp—but revised and adapted for transistorized circuitry. Nagra’s work with low-level signals in microphone preamps and digital recorders led the company’s engineers to focus on a unit that would be very compact in size, utilize the shortest possible signal paths with no internally wired connections (resulting, Nagra says, in strong immunity to RFI), use highly efficient circuits that could operate from a simple very-low-noise power supply fed by a single 9V battery, have sufficient gain for low-output moving coils, and employ the modular impedance-loading circuit found in the VPS and PL-P.

Keeping with Nagra’s professional vibe, the top plate of the anodized, brushed aluminum chassis is decorated with screen prints of diagrams for the main circuit, power supply, phono load, and in/out connections. Given my lack of technical chops, I could only decipher the latter. Otherwise, these squiggly circuit renderings brought to mind another Swiss artist, Paul Klee, whose playful drawings I recently viewed at San Francisco’s Museum of Modern Art.

The 9V battery nests inside its own tiny compartment, and accessing the BPS’s interior to insert that battery, change load values and gain, and so on reveals a splendidly built, miniature, double-sided, gold-plated circuit board, complete with a pair of tiny Nagra-made transformers for boosting the output of moving-coil cartridges. As mentioned, all connections are wired directly to the board; carefully sorted and matched bipolar transistors provide amplification. And should you encounter hum or RFI, as I did, living not far from our city’s main broadcast tower, you may switch the BPS from its standard unbalanced mode to balanced via internal jumpers, which works like a charm to eliminate noise.

Aside from the RCA inputs and outputs and grounding lug round back, the only control on the BPS is a three-way toggle on the front plate, which serves as an On/Off switch and battery tester (a glowing bright red LED indicates a healthy battery).

Rather than your standard cardboard box or fancy Bordeaux-style wooden crate, the BPS comes packaged in a small plastic-anvil-like case, with protective foam inserts carved out for the phonostage, two Allen keys, a 9V battery, and a set of six mc load modules (three resistive, three capacitive).

Because battery life is estimated at 100 hours and also because, like most solid-state circuits, the BPS will sound its best when left continuously on, Nagra has also placed a socket on the unit’s rear that accepts a 7–10V wall-wart-type power supply with a direct current of 10 milliamperes. While the power supply is not included, you can pick one up at your local Radio Shack. The twelve bucks or so spent will not only easily pay for itself in spared battery life (the battery engages or disengages when the supply is plugged in and out), it will also ensure that your BPS is always at its best, since it can sound a little bright and edgy before it is warmed up. If you operate the unit by battery only, switching it on and off, that’s the sound you’re likely to get all the time (unless you wish to burn though a pile of 9-volts). Using the wall-wart, leaving the BPS in the On position, and simply disconnecting the wall-wart’s plug before a listening session to let the battery take over gives you a far cleaner, warmer, smoother, more dynamic, and much more musical sound.

Nagra BPS Phono Stage

What's remarkable about the Nagra BPS phono stage ($2395) is not its small size, although that's certainly attention-grabbing.

Instead, it's the circuitry and well-considered features that are squeezed into this hand-sized chassis that make the BPS noteworthy.

The BPS uses essentially the same circuit as Nagra's VPS phono stage, but it omits the VPS's tubes. Like the VPS, it uses custom Nagra step-up transformers to derive its gain -- 45 to 60dB, making it suitable for use with moving-coil cartridges. It runs on a nine-volt battery, although wall power is also an option.

The smart features continue underneath, with a skid pad that spells out the Nagra name.




Nagra BPS Battery-Powered Phonostage

Gain: 62dB (mc), 51dB (mm)
Supplied load options: 100 ohms, 220 ohms, 330 ohms, 100pF, 220pF, 470pF
Battery type: 9V
Output: 2V
Inputs/outputs: RCA
Dimensions: 4.25" x 1" x 6.25"
Weight: 16.9 ounces
Price: $2399




No hay reseñas de clientes en este momento.

Escribe tu opinión