JL AUDIO E-SUB E110

Nuevo producto

Subwoofer activo de 10'' y 1.200 W. Acabados disponibles: Blanco brillo, negro y palisandro.

  • Subwoofer 10". 
  • Respuesta: 23 a 120Hz (+/- 3dB). 
  • Amplificador: 1200W RMS (Pico). 
  • Topología: Caja cerrada. 
  • Dimensiones: 36.2x34.5x41.9cm (AxLxP). 
  • Peso: 23.9kg

Más detalles

2 200,00 € impuestos inc.

  • Black piano
  • Black Ash

Más

Especificaciones

ACABADO Negro brillo, blanco brillo 
ACABADO DE REJILLA Tejido negro (rejillas separadas para controladores)
TIPO DE RECINTO Sellado, Paredes no paralelas
RESPUESTA DE FRECUENCIA  25 - 116 Hz (+/- 1,5dB) -3 dB a 23 Hz / 120 Hz -10 dB a 18 Hz / 165 Hz
ÁREA DE PISTÓN EFECTIVA 58,78 sq in / 0,0379 sq m
DESPLAZAMIENTO EFECTIVO 131 cu in / 2,1 L
POTENCIA DEL AMPLIFICADOR 1200 W
ENCENDIDO/APAGADO Sensor de señal
MODO DE FILTRO  Low-pass
PENDIENTE DEL FILTRO 24 dB
FILTRO RANGO DE FRECUENCIA 25 Hz - 130 Hz
FUNCIÓN DE FILTRO Si
POLARIDAD 0 -180 grados
VARIABLE DE FASE 0 - 280 grados
SALIDAS DE LÍNEA Estéreo o mono (2 x RCA)
SALIDA A ESCLAVO BALANCEADO No
DIMENSIONES 343 mm (ancho) x 362 mm (alto) x 419 mm (fondo)
PESO 23,9 kg

MANUAL JL AUDIO E110.PDF

E-Sub e110

Powered Subwoofer with 10-inch Subwoofer Driver, 1200 watts

Applying a series of our key technologies, 

E-Sub powered subwoofers deliver exceptional sound quality, power and value in a wide range of demanding applications

E-Sub drivers employ our exclusive DMA technology to optimize the drivers' motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.

The extreme mounting depth of the E-Sub driver is very deliberate. It permits wide gaps to exist between the three suspension elements (the rubber surround and the dual spiders), imparting exceptional mechanical stability over the driver's full excursion range. 

This further improves linearity, reduces distortion and enhances long-term reliability. In a stroke of engineering elegance, the E-Sub’s steel front mounting flange forms the entire front baffle of the finished product, while the driver’s back-plate is threaded and bolted to the rear wall of its enclosure for support.

To power these innovative drivers, we engineered a completely new switching amplifier with a regulated, switching power supply, making its chassis more compact, lightweight and efficient, while still delivering ample, clean power to fully exercise the E-Sub driver's performance envelope.

Conveniently controlled from the E-Sub cabinet’s top panel, the amplifier incorporates studio-grade signal processing to make adjustments a much more enjoyable experience than rear–mounted controls found on most powered subwoofers. An attractive cover hides and protects the controls during normal use.

The feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. Analog inputs are provided for unbalanced line-level signals or speaker level signals. 

Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated.

The E-Sub’s active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer's amplifier and a high-pass filtered signal exiting its line outputs. When the on-board crossover is defeated, as is typical in a home theater installation, the line outputs deliver a pass-through, buffered signal identical to its line inputs, easily permitting multiple E-Subs to be interconnected in a ‘daisy-chain' arrangement. 

Switchable polarity and a fully variable phase control round out the signal processing section. All signal processing is performed in the analog domain, ensuring very low latency in critical applications.

Precision-built in JL Audio's U.S. factory, all E-Sub are individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.

E-Sub

The E-Sub powered subwoofers apply a series of our key technologies to deliver exceptional sound quality, power and value in a wide range of demanding applications. Combining a state-of-the-art, DMA-optimized long excursion driver with a highly efficient, proprietary switching amplifier, E-Subs deliver a level of performance that belies their compact dimensions and cements their value.

The E-Sub subwoofer driver features a radical, deep architecture designed to create a highly linear, mechanical action and a motor design with enough linear excursion to handle the moste112_SUB_FDN challenging program material.

A totally new switching amplifier was engineered for the E-Subs, with a compact and efficient switching power supply. This design allows us to keep the E-Sub's dimensions compact while delivering ample clean power that will fully exercise the drivers' excursion ranges.

The E-Sub's feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. A true, two-way onboard crossover with high-pass line outputs allows the E-Sub to integrate seamlessly with two-channel systems, and high-level inputs even make it possible to add an E-Sub to systems lacking line outputs. Polarity and variable phase controls make it possible to precisely blend the E-Sub's output with that of your main speakers.

Every E-Sub is precision-built in JL Audio's U.S. factory and individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.

E-Sub e110

Powered Subwoofer with 10-inch Subwoofer Driver, 1200 watts


Applying a series of our key technologies, E-Sub powered subwoofers deliver exceptional sound quality, power and value in a wide range of demanding applications

E-Sub drivers employ our exclusive DMA technology to optimize the drivers' motor strength, ensuring linear behavior over a very long excursion range. Unlike typical steady-state modeling systems, DMA takes into account the dynamic shifts created by current flow and back EMF under real power conditions, with real program material. The payoff offered by DMA optimization is a driver that faithfully tracks its input signal, at all listening levels, leading to superior bass definition and dynamics.

The extreme mounting depth of the E-Sub driver is very deliberate. It permits wide gaps to exist between the three suspension elements (the rubber surround and the dual spiders), imparting exceptional mechanical stability over the driver's full excursion range. This further improves linearity, reduces distortion and enhances long-term reliability. In a stroke of engineering elegance, the E-Sub’s steel front mounting flange forms the entire front baffle of the finished product, while the driver’s back-plate is threaded and bolted to the rear wall of its enclosure for support.

To power these innovative drivers, we engineered a completely new switching amplifier with a regulated, switching power supply, making its chassis more compact, lightweight and efficient, while still delivering ample, clean power to fully exercise the E-Sub driver's performance envelope.

Conveniently controlled from the E-Sub cabinet’s top panel, the amplifier incorporates studio-grade signal processing to make adjustments a much more enjoyable experience than rear–mounted controls found on most powered subwoofers. An attractive cover hides and protects the controls during normal use.

The feature set has been designed to allow the use of E-Subs in a wide range of applications, from full home theater systems to dedicated two-channel music systems, to desktop audio workstations. Analog inputs are provided for unbalanced line-level signals or speaker level signals. Dedicated line outputs are included to make a bi-amped system arrangement with no additional hardware required. Useful in combating ground-related noise problems, a rear panel switch configures the line level inputs as grounded or isolated. 

The E-Sub’s active crossover is a true two-way, 4th order Linkwitz-Riley design, with a low-pass filter feeding the subwoofer's amplifier and a high-pass filtered signal exiting its line outputs. When the on-board crossover is defeated, as is typical in a home theater installation, the line outputs deliver a pass-through, buffered signal identical to its line inputs, easily permitting multiple E-Subs to be interconnected in a ‘daisy-chain' arrangement. Switchable polarity and a fully variable phase control round out the signal processing section. All signal processing is performed in the analog domain, ensuring very low latency in critical applications.

Precision-built in JL Audio's U.S. factory, all E-Sub are individually performance-verified and tested to deliver years of listening enjoyment in your home audio or home theater system.

Finish: Gloss Black

Grille finish: Black fabric

Enclosure Construction: MDF

Reseñas

No hay reseñas de clientes en este momento.

Escribe tu opinión

JL AUDIO E-SUB  E110

JL AUDIO E-SUB E110

Subwoofer activo de 10'' y 1.200 W. Acabados disponibles: Blanco brillo, negro y palisandro.

  • Subwoofer 10". 
  • Respuesta: 23 a 120Hz (+/- 3dB). 
  • Amplificador: 1200W RMS (Pico). 
  • Topología: Caja cerrada. 
  • Dimensiones: 36.2x34.5x41.9cm (AxLxP). 
  • Peso: 23.9kg